track

Scientific Equipment

 
SISeriesBPIMERevC

Kaelus - E-Series PIM Analyzers

Bench Top PIM Analyzers

Kaelus is the world leader in the design and manufacture of Passive Intermodulation (PIM) test equipment. Kaelus bench top PIM Analyzers have been used for over 15 years by component manufacturers around the world to improve RF design and verify product performance.

The E-Series PIM Analyzer is a complete rack mounting PIM test solution including a transceiver (TR) module, a high performance front-end (FE) filter module, a system controller and intuitive user software. This economical solution comes in model variations that cover all major commercial wireless bands.

Product Features

  • Fully integrated system in compact 6U size   
  • Fully configurable frequencies, power and IM product
  • USB control interface   
  • Calibrated for output power and input PIM levels

TECHNICAL SPECIFICATION

TRANSMITTER

Transmit band

Model dependent – see Variants below

Channel steps

200kHz

Frequency accuracy

± 5 ppm (max), aging ± 1 ppm (max) after first year

Power per tone (adjustable)

1 – 25W (30dBm - 44dBm)*

Power accuracy (per tone)

± 0.35dB

RECEIVER & FRONT END

Receive band

Model dependent – see Variants below

Measurement noise floor

-130dBm (-135dBm typ)

Measurement range

-65dBm to -130dBm

Receiver accuracy

± 1.5dB @ -120dBm

Residual intermodulation

-125dBm (-168dBc), (max) over 90% of IM frequency band measured using 2 x 43dBm (20W) tones

*43.5dBm max with option B

ELECTRICAL

Mains power

115 – 230V, 50/60Hz AC

AC power

800W

RF status

Dry contact relay closure when RF power present at either TX port. Max operating voltage +30V (AC or DC), max operating current 500mA (AC or DC)

Warm-up time

15 minutes for specified accuracy

MECHANICAL

Dimensions

19 x 20.5 x 5.875in (482.6 x 520.7 x 149.2mm) (x2 TR/FE modules)

Weight

33lbs (14.9kg) TR module | 25lbs (11.1kg) FE module

Cooling

Forced air

Ports (TR module)

x1 USB (type B)
x2 RF (TX) Output ports – DIN 7/16 (f)
x1 RF (RX/PIM) Input Port – N (f)
x1 RF Status – BNC (f)
x1 Fused AC Power Inlet (IEC C14)

Ports (FE module)

x1 USB (type B)
x2 RF (TX) input ports – DIN 7/16 (f)
x1 RF (RX/PIM) output port – N (f)
x1 RF DUT port – DIN 7/16 (f) (x2 for option F or D – see below)

ENVIRONMENTAL

Operating temperature range

-10°C to +40°C (operating) | -10°C to +60°C (storage)

Ingress protection (IP)

Indoor use (or similar protected outdoor environment)

Relative humidity

5% to 90% non-condensing

VARIANTS

BASE MODEL

TR MODEL

FE MODEL

TX FREQUENCY BAND

RX FREQUENCY BAND

IM Products Standard

IM Products Option B

SI-0700LE

SI-0700-TR

SI-0700L-FE-B

728 – 746MHz

698 – 716MHz

IM3 - IM27*

IM3 - IM27

SI-0700HE

SI-0700-TR

SI-0700L-FE-B

728 – 757MHz

776 – 787MHz

IM3 - IM27*

IM3 - IM27

SI-0850E

SI-0809-TR

SI-0850-FE-B

869 – 894MHz

824 – 849MHz

IM3 - IM27*

IM3 - IM27

SI-0900E

SI-0809-TR

SI-0900-FE-B

935 – 960MHz

890 – 915MHz

IM3 - IM27*

IM3 - IM27

SI-0703E

SI-0703-TR

SI-0703-FE-B

758 - 803MHz

703 - 748MHz

IM3 - IM27*

IM3 - IM27

SI-0790E

SI-0709-TR

SI-0790-FE-B

791 – 821MHz

832 – 862MHz

IM3 - IM27*

IM3 - IM27

SI-0901E

SI-0709-TR

SI-0901-FE-B

925 - 960MHz

880 - 915MHZ

IM3 - IM27*

IM3 - IM27

SI-1800E

SI-1819-TR

SI-1800-FE

1805 – 1880MHz

1710 – 1785MHz

IM3 - IM7

IM3 - IM27

SI-1900E

SI-1819-TR

SI-1900-FE

1930 – 1990MHz

1850 – 1910MHz

IM3 - IM13

IM3 - IM27

SI-2100EE

SI-2100-TR

SI-2100E-FE

2110 - 2170MHz

1965 - 2060MHz

IM3 - IM11

IM3 - IM27

SI-2100E

SI-2100-TR

SI-2100-FE

2110 – 2170MHz

1920 – 1980MHz

IM7 - IM13

IM7 - IM27

SI-2600E

SI-2600-TR

SI-2601-FE

2620 - 2690MHz

2500 - 2570MHz

IM3 - IM27*

IM3 - IM27

 

*Option B is standard for 0700, 0703, 0790, 0850, 0900, 0901 and 2600 models.



Brochure Download

TOP

Connexion
Castle Microwave is a Connexion Technologies Company.